Swiclick manufactures snap action micro switches for appliance, industrial control and equipment OEM projects. Our G10, G15 and G20 families cover compact signal-level switching, selected 6 A and 10 A miniature configurations, and higher-current models rated up to 16 A at 125/250 VAC. Available actuators include pin plungers, straight levers and roller levers, depending on the model.

For a new design, select the switch by electrical load, contact form, operating force, travel, actuator geometry and mounting dimensions. For an existing production assembly, provide the incumbent part number or drawing so that a candidate can be reviewed for second-source qualification.

Swiclick supports OEM and EMS buyers with product selection, technical documentation, sample evaluation and production supply under ISO 9001 and IATF 16949 quality systems. Product approvals and ratings are confirmed against the exact part number.

How Snap Action Affects Switching Performance

A snap action switch uses a spring mechanism to transfer its contacts rapidly when the actuator reaches a defined operating point. This mechanism provides repeatable switching behavior across a range of actuator speeds.

For OEM equipment, the main selection factors are operating position, operating force, pretravel, overtravel, differential travel and contact ratings. All values must be checked against the exact model and the movement available in the finished assembly.

For a detailed explanation of the mechanism, see our guide to how snap action switches work .

G10, G15 and G20 Snap Action Switch Selection

Swiclick supplies three snap action micro switch families for different mechanical envelopes and electrical load requirements. Compare the body size, actuator arrangement, contact configuration and model-specific ratings before selecting a production candidate.

Series Typical Rating Class OEM Applications Product Selection
G10 Compact signal-level models Consumer electronics, position detection and compact mechanical controls View G10 Example
G15 Selected 6 A and 10 A models at 125/250 VAC Home appliances, equipment controls, interlocks and PCB assemblies Compare G15 Models
G20 Selected 16 A models at 125/250 VAC Higher-current appliance switching and industrial equipment View G20 Example

Ratings, contact forms, force, travel, temperature limits and approvals vary by model. Confirm the selected part number and datasheet before qualification.

snap action switch body sizes G10 G15 G20

Reading the Rating

Datasheets on this class print more than one number and engineers routinely read the biggest one.

The headline figure is current at a stated voltage under a stated load condition. On many appliance-switch markings following EN/IEC 61058, a value in parentheses after it represents a lower declared rating under a specified motor or inductive test condition. That convention is widespread but the exact interpretation belongs to the applicable product standard and the certification file for that part, so verify rather than assume.

DC ratings sit lower again. Each AC current zero gives the arc a chance to extinguish, provided the gap and dielectric recovery prevent restrike. A DC arc has no such opportunity.

Lamp loads are a third case. A cold tungsten filament draws several times its running current at switch-on. Suitability for tungsten or other high-inrush loads has to come from the load classification or a manufacturer test rating. Do not infer it from a T125 marking, which declares ambient temperature and nothing else. Mechanical switch requirements now sit in IEC 61058-1-1, and the marking rules go with them. If you are switching a motor or an inductive load, reading the inductive rating properly is worth the time.

how to read snap action switch ratings and markings

Life Data and What It Actually Means

Two life figures appear on these parts and they are not interchangeable.

Mechanical life is how many times the spring can operate with no load on the contacts. It is a large number and it is rarely the limit.

Electrical life is how many times the contacts survive switching your load. It is much smaller and it falls as the load type gets harder. A part quoted at a given electrical life under a resistive load will not reach that figure on an inductive one.

The declared endurance is tied to the test conditions stated for the part. It should not be read as unloaded mechanical life, and it should not be read as guaranteed headroom. If your product needs more cycles than the declared figure, ask for a part with a higher declared endurance rather than assuming margin exists.

Snap Action Switches for Appliance and Industrial OEMs

Snap action switches are used where equipment needs repeatable electrical switching at a defined mechanical position. OEM selection depends on the actual application, including the load, available actuator movement, installation environment and required life.

  • Home appliances: Door and lid detection, appliance control mechanisms and internal switching functions. Electrical load, actuator clearance and operating life should be reviewed together.
  • Industrial automation: Position detection, end-of-travel sensing, cam actuation and equipment controls. Compare the operating position and differential travel against the mechanism.
  • Office equipment: Paper-path sensing, tray-position detection and moving-part monitoring, where compact body size and repeatable actuation matter.
  • Consumer electronics: Compact control and detection mechanisms requiring miniature switches with appropriate contact forms and force.
  • Automotive electronic modules: Selected position-sensing and internal control applications, subject to the actual module requirements and customer qualification process.

For position-detection applications, review our micro limit switch selection guide . For alternative sourcing of an existing approved component, see our switch second source solutions .

Safety-related guard and personnel protection functions require appropriately certified safety switching devices and a validated safety circuit. Standard snap action micro switches should not be assumed to provide positive-opening safety operation.

How to Qualify a Snap Action Switch Supplier for OEM Production

Selecting a snap action switch supplier for production requires more than comparing nominal current ratings or housing sizes. Engineering and purchasing teams should review the following requirements before approving a standard or second-source part.

  • Electrical compatibility: Confirm contact form, current, voltage, load type, minimum applicable load and applicable rating conditions.
  • Mechanical compatibility: Compare body dimensions, mounting holes, terminals, actuator geometry, operating position, force and travel.
  • Reliability: Evaluate mechanical and electrical life using conditions relevant to the actual application.
  • Quality controls: Review drawing revisions, critical dimensions, contact resistance, force consistency and lot traceability.
  • Certification: Verify required product approvals against the exact model, rating and certification documentation.
  • Production continuity: Confirm engineering sample availability, ongoing production capability, packaging and change-control requirements.

Swiclick manufactures snap action micro switches under ISO 9001 and IATF 16949 quality management systems. Selected product models are supported by UL, TÜV Rheinland or ENEC certification documentation, depending on the exact part and approval scope.

For custom specifications, the engineering review can include actuator configuration, operating force, terminals and other model-dependent mechanical requirements. Feasibility must be confirmed before sample and production commitments.

Request Snap Action Switch Samples or an Engineering Review

Send the existing manufacturer and full part number, datasheet or drawing. For a new design, provide the contact form, operating voltage and current, load type, actuator requirement, force and travel targets, mounting dimensions and estimated annual volume.

Swiclick can review suitable standard candidates, identify specification differences and support sample evaluation before OEM production qualification. Qualifying standard models may be requested as 1 to 50 free samples, with a standard four-working-day sample lead time.

Submit Your Switch Requirements

FAQ

Is a snap action switch the same as a micro switch? 

The terms commonly overlap. Snap action describes the switching mechanism, while micro switch is widely used for compact switches employing that mechanism. The exact construction, electrical rating and actuator configuration depend on the model.

Which snap action switch is suitable for OEM equipment?

The selection depends on the electrical load, contact form, mounting dimensions, actuator geometry, operating force and travel. Swiclick offers G10, G15 and G20 families covering different size and rating classes. Final selection requires model-level verification.

Can Swiclick supply snap action switches for appliance and industrial OEM projects?

Yes. Swiclick supplies snap action micro switches for equipment control, position detection and other suitable appliance and industrial applications. Engineering evaluation and production qualification depend on the selected model and project requirements.

Can Swiclick provide a second-source alternative?

Swiclick can evaluate existing switch part numbers and datasheets to identify candidate alternatives. A second-source review includes electrical ratings, contact form, actuator geometry, terminals, dimensions, operating characteristics and life. Candidate parts require application validation before production approval.

Are engineering samples available?

Qualifying standard models are eligible for 1 to 50 free samples with a standard four-working-day sample lead time. Custom requirements follow a separate feasibility and sample schedule.

Are all Swiclick snap action switches UL or ENEC approved?

No. Product approvals are model-specific. Selected models have relevant UL, TÜV Rheinland or ENEC documentation. Confirm the approval scope, electrical rating and applicable certification file for the exact part number.

Can a standard snap action switch serve as a safety interlock?

Standard snap action switches can support suitable non-safety interlocking functions. Personnel safety functions require appropriate safety-rated devices and circuit-level validation. A standard normally-closed switch should not automatically be considered a certified positive-opening safety switch.