1A 125VAC SPDT Hinge Lever Micro Switch
Part Number: G10-1-04PN-60-1164
The G10-1-04PN-60-1164 is a compact SPDT snap-action micro switch with a stainless-steel hinge lever actuator, designed for PCB-mounted position detection and switching applications. It uses COM, NO and NC contacts, a 12.8 × 5.8 × 6.6 mm body and a rated load of 1 A at 125 VAC.
The 13.5 mm lever provides a light operating force of ≤60 gf for mechanisms that need actuation with limited applied force. The switch provides ≤200 mΩ initial contact resistance, operates from −25 °C to +85 °C and is rated for 100,000 mechanical cycles and 10,000 electrical cycles at 1 A 125 VAC.
Key Features
- G10 subminiature snap-action micro switch
- SPDT configuration with COM / NO / NC contacts
- Stainless-steel hinge lever actuator
- 13.5 mm lever length
- 3-pin through-hole PCB mounting
- 5.08 mm terminal pitch
- 1 A at 125 VAC electrical rating
- Light ≤60 gf operating force
- ≤200 mΩ initial contact resistance
- −25 °C to +85 °C operating temperature
- 100,000-cycle mechanical life
Applications
- Position and limit detection
- Consumer electronics
- Office equipment
- Home appliance control mechanisms
- Industrial control equipment
- Compact mechanical sensing interfaces
When evaluating this model as an alternative to an existing lever micro switch, confirm the PCB footprint, lever length and geometry, operating force, operating position, terminal arrangement and actual electrical load before qualification.
G10-1-04PN-60-1164 can also be evaluated as a second-source candidate for selected Omron D2F-01L applications. It is a qualification candidate rather than a guaranteed pin-to-pin replacement, and minor PCB adjustment may be required.
APPLICATIONS
SPECIFICATIONS
| Part Number | G10-1-04PN-60-1164 |
| Switch Type | Subminiature snap-action micro switch |
| Contact Form | SPDT (COM / NO / NC) |
| Actuator | Hinge lever, stainless steel |
| Mounting | Through-hole PCB, 3 pin |
| Terminal Pitch | 5.08 mm |
| Body Size | 12.8 × 5.8 × 6.6 mm |
| Lever Length | 13.5 mm |
| Electrical Rating | 1 A at 125 VAC |
| Operating Force | ≤60 gf |
| Return Force | 8 gf min |
| Operating Position | 8.8 ± 0.8 mm |
| Free Position | 11.5 mm max |
| Pretravel | 3.0 mm max |
| Contact Resistance | ≤200 mΩ |
| Insulation Resistance | ≥100 MΩ |
| Dielectric Strength | 500 VAC, 1 min |
| Terminal Strength | 25 N for 10 ± 1 s |
| Solder Heat Resistance | 260 ± 5 °C for 5 ± 1 s |
| Operating Temperature | −25 °C to +85 °C |
| Operating Relative Humidity | ≤85% |
| Mechanical Life | 100,000 cycles |
| Electrical Life | 10,000 cycles at 1 A 125 VAC |
| Housing Material | PBT, 30% glass-fiber reinforced |
Typical Applications
The G10-1-04PN-60-1164 is a compact lever-actuated snap-action micro switch designed for applications where a moving mechanism needs to trigger an SPDT contact with relatively low operating force.
Typical applications include position and limit detection, consumer electronics, office equipment, home appliance control mechanisms and compact industrial control assemblies.
For design qualification, confirm the lever geometry, free position, operating position, available actuator travel, PCB terminal layout and actual electrical load in the finished mechanism.
PART NUMBER KEY
The current product specification confirms the complete model number G10-1-04PN-60-1164 but does not provide an official suffix-by-suffix ordering-code definition. Confirm alternate G10 configurations against the corresponding product drawing and datasheet.
MECHANICAL DRAWING
Units: mm
General dimensional tolerances
0–10 mm: ±0.20 mm
11–25 mm: ±0.30 mm
26–50 mm: ±0.40 mm
Angle: ±2°
Key dimensions
Body length: 12.8 mm
Body width: 5.8 mm
Body height: 6.6 mm
Lever length: 13.5 mm
Terminal pitch: 5.08 mm
Operating position: 8.8 ± 0.8 mm
Free position: 11.5 mm max
Unless otherwise specified, use the official product drawing and datasheet as the controlling dimensional reference.
| NO. | NAME | MATERIAL | QTY. | FINISHING |
|---|---|---|---|---|
| 1 | Base | PBT 30% GF | 1 | White |
| 2 | Upper Cover | PBT 30% GF | 1 | Black |
| 3 | Button | PBT 30% GF | 1 | White |
| 4 | Spring | Beryllium bronze | 1 | — |
| 5 | Connecting Terminal | Brass | 1 | Silver plating |
| 6 | Terminal Contact | Copper | 2 | Silver plating |
| 7 | Spring Contact | Silver alloy | 1 | — |
| 8 | Lever | SUS | 1 | — |
All Switches Categories
| Part Number |
G10-1-04PN-60-1164 |
|---|---|
| Switch Type |
Subminiature Micro Switch |
| Contact Form |
SPDT |
| Actuator |
Hinge Lever |
| Mounting |
Through-Hole |
| Number of Pins |
3 |
| Electrical Rating |
1A 125VAC |
| Operating Force |
≤60 gf |
| Return Force |
≥8 gf |
| Operating Position |
8.8 ± 0.8 mm |
| Pretravel |
≤3.0 mm |
| Lever Length |
13.5 mm |
| Contact Resistance |
≤200 mΩ |
| Operating Temperature |
-25°C to +85°C |
| Mechanical Life |
100,000 cycles |
| Electrical Life |
10,000 cycles at 1A 125VAC |
Ready to Take the Next Step? We're Here to Help.
Request free samples: 1–50 pcs, shipped in 4 days. Validate fit and feel before you commit to volume.
Get in Touch
Tel
+86 13106665774
+ 86 13106665774
sales001@swiclick.com
Address
R.m 25D1, Block C, No 2070, Keji Dianzi Building, Shennan Zhong Rd., Futian Dist., Shenzhen, China
WE PROMISE
Send us your model, quantity, and application, and you’ll hear back from our engineers within hours, with technical datasheets and an NDA on request.
Free samples (1–50 pcs) ship in 4 days, and standard products in 7–15 business days, all built under ISO 9001 and IATF 16949 quality systems by a switch manufacturer with 30+ years of in-house tooling and production.
Our team can help you select the perfect configuration.
