G15 Micro Switch Series
Swiclick G15 is the mid-size micro switch family for appliance, equipment and control-board applications that need 6 A or 10 A switching at 125/250 VAC. Available configurations include SPDT and SPST-NO contacts, straight lever and bend-foot PCB versions, with exact ratings, terminals, force and temperature range defined by part number.
G15 at a Glance
Where G15 Fits in the Swiclick Micro Switch Range
G15 sits between the smaller G10 signal-level family and the higher-current G20 family. Choose the family by load, body size, actuator, terminal layout and life requirement rather than current rating alone.
Signal-Level / Ultra-Miniature
For low-current sensing and compact mechanisms where body size and light force are the main constraints.
6 A and 10 A Mid-Size Family
For appliance and equipment switching where a miniature body, PCB mounting and line-voltage load capability are needed.
Higher-Current Basic Switch
For larger 16 A-class applications and heavier appliance or industrial loads.
Available G15 Product Pages
Start with the configuration closest to your application, then confirm the complete datasheet before qualification.
G15-06SM01-40-01
Straight leaf-spring lever, 3-pin SPDT configuration, PCB solder terminals, 6 A resistive / 3 A inductive at 125/250 VAC and 40 ± 20 gf operating force.
G15-10DN01-40-1209
Two functional PCB terminals for COM and NO, 10 A resistive / 5 A inductive at 125/250 VAC, with a 40 ± 20 gf operating force.
G15-06DM01-40-1021
SPDT G15 configuration with right-angle bend-foot PCB terminals for low-profile layouts, rated 6 A resistive / 3 A inductive at 125/250 VAC.
G15-10SM01-40-18
Straight leaf-spring lever with 3-pin SPDT contacts and PCB solder terminals, rated 10 A resistive / 5 A inductive at 125/250 VAC.
G15 Configuration Comparison
Use this table as a navigation aid. The product datasheet remains the source for final qualification.
| Part Number | Contact Form | Rating | Actuator / Terminal | Operating Force | Product Page |
|---|---|---|---|---|---|
| G15-06SM01-40-01 | SPDT | 6 A resistive / 3 A inductive @ 125/250 VAC | Straight leaf-spring lever / PCB solder, 3 pin | 40 ± 20 gf | View → |
| G15-10DN01-40-1209 | SPST-NO | 10 A resistive / 5 A inductive @ 125/250 VAC | PCB solder / 2 functional terminals | 40 ± 20 gf | View → |
| G15-06DM01-40-1021 | SPDT | 6 A resistive / 3 A inductive @ 125/250 VAC | Right-angle bend-foot PCB / 3 pin | 40 ± 20 gf | View → |
| G15-10SM01-40-18 | SPDT | 10 A resistive / 5 A inductive @ 125/250 VAC | Straight leaf-spring lever / PCB solder, 3 pin | 40 ± 20 gf | View → |
Evaluating G15 for an Omron SS-10 Second Source
Swiclick uses the G15 family as a candidate starting point for selected SS-10 requirements, but the family name alone does not establish a direct replacement.
Confirm Before Selecting a Candidate
- Complete Omron SS-10 model number and suffix
- Contact form and terminal mapping
- Actuator type and geometry
- PCB footprint and terminal orientation
- Electrical load and AC/DC duty
- Operating force and travel
- Mechanical and electrical life
- Required approvals and temperature range
Use the Model-Specific Qualification Path
If your incumbent part is an Omron SS-10, review the SS-10 qualification page first. It explains the qualification boundary before you choose a G15 configuration.
How to Choose the Right G15 Model
Start with the requirements that cannot change in your design, then narrow the family by contact, load and mechanical interface.
1. Contact Form
Choose SPDT or SPST-NO according to the actual circuit. Do not infer contact mapping from body shape.
2. Load
Match voltage, current and load type. A 10 A resistive rating does not automatically mean the same capability on an inductive load.
3. Actuator
Confirm lever geometry, operating position, force, pretravel and overtravel against the real mechanism.
4. Terminal Layout
Check straight or right-angle PCB terminals, pin count, pitch and board orientation before releasing a footprint.
Have an Existing Micro Switch Part Number?
Send the current manufacturer, full part number, datasheet, annual quantity and application. Swiclick can compare the incumbent against the G15 family and identify the closest candidate and the remaining qualification work.
Frequently Asked Questions
What is the Swiclick G15 series?
G15 is Swiclick’s mid-size snap-action micro switch family. Current published G15 product pages include selected 6 A and 10 A models for 125/250 VAC applications, with contact form, actuator and terminal configuration varying by part number.
Is every G15 switch rated the same?
No. Ratings, contact form, actuator, terminal layout, temperature range and life vary by part number. Always qualify the exact G15 model rather than the family name.
Does G15 include both SPDT and SPST models?
Yes. Current published examples include SPDT models such as G15-06SM01-40-01 and G15-10SM01-40-18, and an SPST-NO model, G15-10DN01-40-1209.
Can G15 be used as an alternative to Omron SS-10?
G15 can be evaluated as a candidate family for selected SS-10 requirements. The exact SS-10 suffix, actuator, contacts, terminals, load, force and life must be compared before approval.
Can I request samples before production qualification?
Yes. For suitable standard models, use the Swiclick contact page to request samples and submit the application requirements for review.
